Set for repairing punctures of tubeless tires 8pcs. (M57470)

The kit allows you to quickly fix nail damage on tires of all types.

A useful addition to any tire workshop - quick and cheap repairs!

A sensational kit for instant tire repair, indispensable in any garage, home workshop, or professional tire shop. Within minutes of starting the repair, the tire is fixed and ready for use.

The kit includes:

• Repair cord (200mm) - 5 pcs.
• Glue applicator, 90 mm long
• Awl with a L-shaped handle
• Activator 12 ml

How to repair tires with a cord?

1. Mark the damaged area of the tire with chalk, then remove the nail, screw, or other foreign object.

Insert the awl into the tire, paying attention to the angle of insertion into the tire.

Using chalk is necessary because after removing the nail or screw

we may "lose" the damaged spot on the tire.

2. Use the glue applicator to clean the punctured hole,

inserting it at an angle of the puncture and to speed up the vulcanization process,

use the activator by applying it to the glue applicator.

3. Thread the butyl cord around the middle of the awl,

then tightly insert the awl into the hole after puncturing,

so that the cord passes through all layers of the tire.

Repeat the motion according to the angle of damage. Remember that

the cord should protrude about 1 cm above the tread (cut off any excess cord if necessary).

4. Quickly pull the awl out of the tire, avoiding twisting the awl,

as this may break it.

5. The wheel is ready for use - just inflate it!

Please note, the kit is intended for emergency repairs, after self-repair.

it is always recommended to contact a specialized vulcanization plant

for diagnosis of the correctness of the repair!