Motor drill, 3.8 kW, 51.7 cc + extension 500mm (M84000S)

The motor drill is used for creating holes of various diameters for household purposes: for example, holes for installing posts or pits for planting plants. The working part of the unit is a screw-shaped drill or auger, which is driven by a two-stroke gasoline engine. Replaceable augers are used to create holes of different diameters (similar to drill bits). The drill is replaced using a quick-release connection. Special extension rods can help increase the drilling depth. The advantages of screw drilling include a higher speed of penetration and the absence of auxiliary and additional work. A significant advantage of the device equipped with a gasoline engine is its autonomy of use and independence from the length of the electrical cable.

Parameters:

• Power: 5.2 hp (3824 W) / 9000 rpm
• Fuel mixture (gasoline/oil): 1:25
• Engine displacement, cm³: 51.7
• Drilling type: 2-operator
• Gear ratio: 1:30
• Maximum drill diameter: 250 mm
• Idle speed: 3000 rpm
• Fuel tank capacity: 1.2 L
• Two-stroke engine with air cooling
• Noise level: 110 dB
• Weight: approximately 9.5 kg
• Vibration level at idle: 2.626 m/s²
• Vibration level: 3.717 m/s²