Motor drill, 3.8 kW, 51.7 cc (M84001B)

The auger is used to create household wells of various diameters: for example, wells for installing posts or holes for planting plants. The working part of the unit is a screw-shaped drill or auger, which is driven by a two-stroke gasoline engine. Replaceable augers (analogous to drill bits) are used to make holes of different diameters. The drill bit is replaced using a quick-release connection. Special extension rods can help increase the drilling depth. The advantages of screw drilling include a higher speed of penetration and the absence of auxiliary and additional work. A significant advantage of the device equipped with a gasoline engine is its autonomy of use and independence from the length of the electrical cable.

Parameters:

• Power 5.2 hp (3824 W) / 9000 rpm
• Fuel mixture (gasoline/oil): 1:25
• Engine displacement, cm³: 51.7
• Drilling type: 2-operator
• Gear ratio: 1:30
• Maximum drill diameter: 250 mm
• Idle speed: 3000 rpm
• Fuel tank capacity: 1.2 L
• Two-stroke engine with air cooling
• Noise level 110 dB
• Weight about 12 kg
• Vibration level at idle - 2.626 m/s²
• Vibration level 3.717 m/s²