Description
Specifications
Supported voltage: 220V / ~50 hz
Power: 3 KW
Current: 32 A (MAX.)
Operating mode: 7 modes
Normal working time: Auto mode program setting
Vacuum suction: 180 KGS / 396.8 LBS
Welding thickness per side: 0.6-1.2 mm
7 different working modes. With a simple control panel, use will not be difficult. Switching between these modes can be very stable and smooth.
The dent puller only creates small solder spots, which means that it will not damage the anti-corrosion paint on the other side of the board.
The cooling system can dissipate heat quickly and prevent overheating or burning. This ensures high efficiency during operation and rapid heat dissipation.
Suitable for sheet metal, meson, straight drawing, spot welding, smoothing, wave line, pin, OT film, triangle etc.
Package includes
1 pc. x Car body stud welder dent repair main unit
1 pc x Wrench
1 pc x hook hammer
1 pc x hand suction cup
1 pc x triangular chuck
1 pc x Wave set
2 pcs x carbon rods
1 pc x instruction manual (English)
1 pc x Carbon rod connector
2 pcs. x gasket set packs (long and round)
10 pcs. triangular straight thrust gaskets
Observation:
This spot welder has an automatic overheating protection function. When the machine is overused, the machine may stop working for a few minutes. During this time, the indicator light in the middle of the display will be on.
Before welding, protect your eyes and wear protective clothing. Do not wear metal jewellery on your hands. Make sure that the product is connected to the grounding cord and that the grounding power cord is not damaged.
The heavy weight of the product will cause unnecessary compression during transport. If you cannot switch it on, check the switch and fuse in time.
*** Translated with www.DeepL.com/Translator (free version) ***
