Battery Angle Grinder | 18V | 4Ah | 125 mm (YT-828254)

Powerful angle grinder designed for professional and advanced applications in workshops, assembly, and construction. Equipped with a modern brushless motor and three-speed control, it provides high efficiency in cutting, grinding, and processing various materials.

The compact design, weighing only 1.5 kg, makes it easier to work in hard-to-reach places and reduces operator fatigue during prolonged use. The soft start system increases the lifespan of the gearbox by reducing jerks during startup.

The grinder is intended for cutting and grinding metals, as well as mineral construction materials such as concrete, brick, natural and artificial stone, and tiles. It can be used with abrasive discs, flap discs, wire brushes, and sandpaper.

• Control button suitable for use with gloves – ensures comfort when working with work gloves, reducing hand fatigue during repeated starts and ensuring safety.
• Brushless motor – provides high performance while reducing energy consumption. The brushless design reduces the number of consumable parts, decreases heating in the drive system, and increases the tool's lifespan.
• Three-speed control – the electronic switch allows adjusting the operating parameters depending on the type of task and the accessory used.
  
  Speed 1: 5000 RPM
  
  Speed 2: 7000 RPM
  
  Speed 3: 9000 RPM
• Soft start function – limits the starting current and smoothly accelerates the disc after the tool is started. This solution improves tool control, enhances work comfort, and reduces the load on the gearbox and drive system.
• Ergonomic design and low weight – allow for comfortable handling of the tool.
• Universal accessory mounting system – the grinder works with discs with a diameter of 125 mm and has a standard spindle thread M14, making it compatible with a wide range of cutting, abrasive, and flap discs available on the market, as well as wire brushes.
• Compatibility with YATO 18V battery system – the device can be powered by batteries of various capacities, allowing for flexible adaptation to the work being performed.
  
  YT-828461 – 2 Ah
  
  YT-828462 – 3 Ah
  
  YT-828463 – 4 Ah
  
  YT-828464 – 6 Ah
  
  YT-828465 – 9 Ah

Power supply voltage: 18 V Li-Ion

Motor type: brushless

Disc diameter: 125 mm

Spindle thread: M14

Soft start function: yes

Speed control: 3-stage

Rotational speed: 5000 RPM

7000 RPM

9000 RPM

Device weight: 1.5 kg

• YT-828254 – grinder with a 4 Ah battery and charger in a case
• YT-828255 – grinder with two 4 Ah batteries and charger in a case
• YT-828256 – grinder only

• Cutting steel and metal elements
• Grinding metal surfaces
• Removing rust and paint
• Repair, installation, and construction
• Grinding with flap discs, sandpaper, and wire brushes