Glue gun (73051)

Temperature glue gun 11mm 12(72)in

A very good quality hot melt glue gun by Lund.

This model is an excellent choice for demanding users, it combines very good technical parameters and high quality workmanship.

With the gun we can glue various materials: wood, plastics, metals, ceramics, glass, textiles, leather and many others. It is also used for modeling, fixing, repairing, sealing and grouting.

Adjusting the speed of gluing depends on the user's pressure. Supports sticks fi 11 and 11.2 mm.

Parameters:

• rated voltage [V]: 230
.
• Rating frequency [Hz]: 50
• Rating power [W]: 12 (72)
• Operating temperature [deg. C]: 190 - 210
• heating time [min]: 3 - 5
• capacity [g/min]: 7
• stick adhesive diameter [mm]: 11 and 11.2
• weight [kg]: 0.15
• protection rating: IPX0
• protection class: II

Purpose of use

• Pistol set on a stand, put under the outlet tip for example. piece of cardboard
• switch on the power supply and wait for the heating element to heat up
• slip the glue cartridge until the glue flows out through the outlet tip, apply glue to one of the surfaces to be glued
• apply glue to one of the surfaces to be glued
• pistol to the surface. /li>
• the surfaces to be glued must be clean, dry and degreased
• press the glued surfaces and wait, after approx. 1 - 2 min the joint is ready

For large surfaces, "spot" bonding is recommended. Foam products (such as polystyrene) can be glued, provided they have a protective lining. Do not apply glue directly to foam products! When gluing textile or similar materials, glue should be applied in an "ess pattern".

Package contents

• glue gun
• glue cartridges 2 pcs
• operating instructions
• guarantee card

Technical data