Description
Long roofer's burner with 50mm nozzle 73341, designed for those covering large roof areas with roofing felt. The length of the burner allows you to work in a standing position, high thermal efficiency / nozzle fi 50 /, perfectly accelerates the work.
The handle has a special valve that closes the gas supply when the burner is put down. This solution results in great savings in gas consumption.
The handle has a special valve that closes the gas supply when the burner is put down
Gas burners are designed for roofing work. Thanks to the power supply by means of a cylinder of compressed butane (it is also possible to supply it with a mixture of propane-butane gases), it is possible to work in places devoid of energy sources.
With the use of a cylinder of compressed butane (it is also possible to supply it with a mixture of propane-butane gases) it is possible to work in places devoid of energy sources Package contents How to use Mount the device according to the instruction manual. Tighten the hose to the assembled device. Tighten the other end of the hose to the gas cylinder. Tighten the hose to the gas cylinder Check the tightness of the connections by slightly unscrewing the cylinder valve, then apply soapy water to the connections. If gas bubbles appear, turn off the gas supply and tighten the leaking connections. Repeat the procedure until complete gas tightness is ensured Tighten the gas valve on the cylinder, then unscrew the appliance valve, but only enough to allow the gas outlet. Ignite the gas at the outlet of the cup. To do this, use a special lighter designed for lighting portable gas burners . After about 20 seconds, press the burner lever). If the flame is too short, adjust the gas pressure with the burner valve. After releasing the lever, the flame will return to economy mode. After finishing work, turn off the cylinder valve, and then, after the flame is extinguished, set aside (put down) the burner on a non-flammable surface to cool down. After cooling down, proceed with maintenance. Details of installation, operation and maintenance of the device in the attached instruction manual. Usage warnings: Technical data
Use only in well-ventilated areas.
Read the instructions before using this device.Brand Vorel Entity responsible for this product in the EU Series GRD Max. pressure 0.4 MPa Power 47 kW Gas type butane from an external cylinder, propane-butane from an external cylinder Flame temperature 1500~1800 ˚C Gas usage 3420 g/h Torch length (without hose length) 745 mm Torch cup quantity 1 Torch cups size 50 mm Flame adjustment yes Hose length 2 m Set includes torch, snake, nozzle Application soldering, heating, drainage, roofing works Symbol 73341
