to take precise measurements in the range from 0 to 25 mm
Preparation for operation:
Clean the measuring surfaces and the guide - use a cotton cloth, do not use solvents or acids
Check the zero position and if necessary adjust with the supplied wrench so that the line labeled "0" on the drum coincides with the horizontal line of the scale
Measuring machine
Method of measurement:
the drum can be rotated only after unlocking the locating clamp
spread the measuring surfaces to a distance slightly larger than the object to be measured
then rotate with the drum to roughly set, and then continue tightening by turning the friction clutch knob
then tighten with the drum. /li>
stop tightening when the clutch engages, that is, further rotation of the knob will not cause rotation of the drum
read the measurement result according to the measurement principle shown in the figure
It is recommended to fix the measured part or micrometer before starting the measurement. This will allow you to achieve the highest measurement accuracy.
It is also recommended that several measurements be taken so that an arithmetic average of the results can be obtained.
Available Delivery Methods: Pickup at Latvijas Pasts branch, Courier delivery to home — Express Pasts, Pickup from our warehouse, Daugavpils
Bank Transfer (Invoice)
Pay at any bank.
Available Delivery Methods: Pickup at Latvijas Pasts branch, Pickup at Omniva parcel locker, Courier delivery to home — Express Pasts, Pickup from our warehouse, Daugavpils
Online Payment (i-Bank)
Pay conveniently and quickly via internet banking: Swedbank, SEB, LPB, Luminor, Citadele, Revolut, Rietumu, N26, Paysera, Wise
Available Delivery Methods: Pickup at Latvijas Pasts branch, Pickup at Omniva parcel locker, Courier delivery to home — Express Pasts, Pickup from our warehouse, Daugavpils
Bank Card
Pay with a bank card upon delivery.
Available Delivery Methods: Pickup at Latvijas Pasts branch, Courier delivery to home — Express Pasts
