Battery cross line leveler 3x3D set (green laser) 20V 2.0Ah LI-ION (box XCUBE) (CLLS20LiMX)

The wireless laser level "WORCRAFT CLL-S20Li 3D" is an excellent assistant in constructing planes, equipped with 12 green spectral laser projections.
Two 360° vertical projections and one 360° horizontal projection allow for various tasks – from designing internal partitions and doors to installing plaster beacons and laying leveling layers.
The main working distance of the level is 30 m, and the pulse mode along with the repeater allows for an effective working distance of up to 50 m even when used outdoors.
The sturdy housing, made of high-quality plastic, features improved ergonomics and stability. The dimensions of the housing are 445 x 320 x 170 mm.
It can be combined with the XCUBE system.

The 360° horizontal plane projection, located at the top of the device, allows for precise marking of the horizontal during the installation of stretch and suspended ceilings, as well as when performing work at height.
Two perpendicular vertical planes at a 360° angle provide convenience when designing and installing internal partitions and openings, as well as allowing control of the accuracy of internal and external corners in the room. Additionally, you can set zenith and nadir points, which allows for transferring marks from the floor to the ceiling and back.
The pendulum lock allows for projecting lines at any angle, turning the device into a convenient laser marker, and also protects the mechanism during transport.
The pulse mode allows for extending the working range of the device when used with a repeater (laser signal receiver).
The automatic leveling system corrects horizontal and vertical alignment in 5 seconds if the initial deviation does not exceed ±4°.
If the mounting angle exceeds ±4°, a flashing signal is activated.
Ease of use is ensured by an intuitive interface that allows for quick setup of the device for operation.
The bright green laser is optimally visible to the human eye, making work with projections convenient and effective at distances up to 30 m.
Two built-in 1/4" and 5/8" threaded sockets allow the device to be mounted on various holders, such as tripods, magnetic holders, or micro screwdrivers, expanding its application possibilities.
The emitting cells are additionally reinforced with high-strength metal, ensuring durability and protecting the optics from damage.
High-quality laser module and optics.
Ergonomic and compact rubber housing made of impact-resistant ABS plastic.
Reinforced metal threaded mounting block for tripods or multifunctional holders.
High level of dust and moisture protection (IP54).
The "WORCRAFT XCUBE026" set includes:
Wireless 3D laser level CLL-S20Li; Charger CLC-20V-1.5; Battery CLB-20V-2.0H; Protective glasses that reduce eye strain and ensure safety during work. Magnetic mount sight. Multifunctional holder with multiple settings and adjustments. Sturdy housing made of high-quality plastic features improved ergonomics and durability. Case dimensions – 445 x 320 x 170 mm.

- 12 beams (360° horizontal plane projection + 2x360° perpendicular vertical projections)
- Laser beam color – green (wavelength – 520 nm)
- Working distance – 30 m
- Self-leveling ± 4°
- Self-leveling time – 4–5 s
- Tripod holes – 1/4 inch and 5/8 inch
- IP54 rubber ABS plastic housing with metal elements
- Projection deviation – up to ±0.3 mm/m
- Battery + charger + case + accessories

Package contents:
Wireless 3D laser level WORCRAFT CLL-S20Li; clamp/magnetic stand; laser sight with marks; glasses for increased visibility of the laser beam; battery CLB-20V-2.0H; charger CLC-20V-1.5; case; packaging box;