3D Laser Level Liner 2V Green ADA (A00532)

The ADA 3D LINER 2V GREEN laser level is an accurate linear laser level designed for indoor and outdoor use. It projects bright green laser lines: 2 vertical lines (2V), 1 horizontal line (H), and a plumb point (D). Applications include leveling surfaces, laying electrical wiring, installing doors and windows, marking drywall structures and suspended ceilings, building walls and partitions, interior finishing work, etc. Features:
   Green beam.
The uniqueness of the ADA 3D LINER 2V GREEN lies in the green color of the laser beam. The green laser beam is much more visible than the red one under the same conditions.
   Selection of laser lines.
The laser lines can be turned off depending on the need or to save battery charge. The presence of a plumb point allows for more precise positioning of the laser level above the required point (or below the intersection point of the vertical planes). The intersecting vertical lines help quickly mark the position of walls or partitions when dividing large spaces. For example, when constructing a separate dressing room.
   Receiver mode.
The device has a working range of 40 m, allowing it to be used in large areas. The receiver mode for the laser radiation, supplied as an option, will allow you to work in bright lighting and at greater distances (up to 70 meters).
   Micrometric screw.
The laser level is equipped with a rotating base. A 360° degree scale is marked on the base. This helps control the angle of rotation of the vertical beams. Directing the vertical beam in the desired direction and to the required point is done using the micrometric screw. This allows for much more convenient and precise alignment of the vertical line compared to levels without a leveling base (rotating base).
   Lithium battery.
The level operates on a high-capacity lithium-ion battery — 3200 mA.
   Charger.
The laser level can operate from a charger (included in the package). If the battery charge is zero or the batteries are dead, you can connect the device to a household power supply via the charger and continue working. When connected, it is essential to remove the batteries from the device. Only batteries can be charged.
   Transport case.
For storage and transportation of the laser level and accessories, the entire set is placed in a transport case. There is a special place in the case for each element.
   Laser glasses.
Laser glasses are useful when working in brightly lit areas at short distances, where the beam is barely distinguishable. In such glasses, the beam is clearly visible on any surfaces. Complete set:
Laser level
Transport case
Lithium battery
Charger
Battery adapter
Magnetic target
Extension screw
Laser glasses
Instructions