Accuracy of the Laser Rotating Level
±0.15 mm/m
Laser Projection
1H (360°) or 1V (360°)
Working Range
400 m with receiver
Levelling Modes
Horizontal automatic, vertical automatic
Laser
Class 2, 520 nm, < 1 mW
Dust and Moisture Protection
IP 65
Operating Temperature
-10...+40 °C
Mounting Thread for Stand
5/8"
Power Supply of the Level
4xAA / 1.5 V or batteries
Dimensions
200x200x200 mm
Weight of the Laser Level
2.4 kg
The ADA ROTARY 400 HV-G Servo laser level is a construction rotating level with a bright green beam, featuring an electronic compensator on servos. The servos provide an accuracy of ± 0.15 mm/m and a tilt compensation range of up to ±5°.
The green laser beam is the uniqueness of this rotating level. The green beam is much more visible than the red one under the same conditions.
Automatic Levelling. Levelling in the vertical or horizontal plane is performed automatically using servos based on tilt sensors. In case of an accidental impact, the device stops working, performs levelling, and continues operation.
Manual Angle Selection. The function for adjusting the tilt angle of the device in the X and Y planes up to 5° allows planning slopes in the horizontal plane in all directions.
Laser Rotation Speed Selection. The rotation speed of the laser emitter is adjustable from 0 to 600 rpm. The higher the speed, the more frequently the laser point travels a large distance from the level during levelling. For operation without a receiver, it is more convenient to use a lower speed.
The scanning mode is designed for operation in a specific sector. The sector changes from a point to 180°. This function is necessary if the laser beam is needed only in a specific location or when multiple devices are working simultaneously on the construction site. The laser beam can be moved to a specified point using a remote control.
Working with a Receiver. When working at large distances, a laser beam receiver, which is included in the package, is used. By attaching it to the level, measurements can be taken at distances of up to 400 meters.
Remote Control. When working at distances of up to 20 meters, it is convenient to use a remote control. You won't need to reach for the laser level to change operating modes.
An additional 5/8'' holder will allow placing the ADA ROTARY 400 HV-G Servo on a stand for vertical marking.
The ADA ROTARY 400 HV-G Servo is perfect for horizontal and vertical marking during construction and finishing works — for the installation of engineering communications, marking floors and walls, installing ceilings and ventilation systems, performing planning works, marking curved surfaces, carrying out finishing works, creating entrances and exits with a slope, etc.
Package Includes:
Rotating Level
Laser Beam Receiver
Receiver Mount
Remote Control
Laser Target
Laser Glasses
Charger
Plastic Case
