Drill Sharpening Machine 3-16mm (ES-0016)

Diameter of the grinding plate: 58 mm; 70 mm

Diameter of the drill:

- 3 mm - 10 mm (plate 58 mm)

- 8 mm - 16 mm (plate 70 mm)

Angle at the tip of the drill: 118 degrees Product Description

The sharpener is designed for sharpening steel drills (high-speed steel, cobalt, carbide) for metal. The sharpener allows sharpening drills from 3 mm to 16 mm. The adapter supports drills of the following diameters:

3 mm / 3.5 mm / 4 mm / 4.2 mm / 4.5 mm / 5 mm / 5.5 mm / 6 mm / 6.5 mm / 7 mm / 7.5 mm / 7.5 mm / 8 mm / 8.5 mm / 8.5 mm / 9 mm / 9.5 mm / 10 mm An additional adapter supports drills with a diameter of:

8 mm / 8.8 mm / 9.5 mm / 10.3 mm / 11.1 mm / 12 mm / 12.7 mm / 13.5 mm / 14.3 mm / 15.1 mm / 16 mm Such a wide range of sizes allows sharpening the most commonly used drills. Thanks to the simple operation, the blade allows sharpening a drill in just a few seconds, while ensuring high repeatability. The cutting edge obtained in this way maximizes the drill's performance. TECHNICAL SPECIFICATIONS: Power: 250 W

Power supply: 230 V ~ 50 Hz

Rotation speed: 1600 rpm

Working diameters: 3-16 mm