Sealer for bare tires MANNOL 450ml (9906)

Tire sealant Reifen Doctor - an easy-to-use special spray for emergency punctures of tubed and tubeless tires on alloy and stamped rims without dismounting them. The foam created quickly and reliably seals all types of punctures and leaks up to 5 mm in diameter, creating a strong self-vulcanizing film upon contact with air. It is applicable to tires of all sizes for passenger cars, light trucks, and trailers. It is not used in the case of long cracks or when the tire has slipped off the rim.

Functions:
- Stays active in the tire for a long time and prevents air leakage in the future, including repeated punctures;
- Does not cause oxidation and rust on the rim surface;
- Does not affect wheel balancing;
- Does not freeze in cold weather

Application:
1. If possible, remove the cause of the puncture (nail, self-tapping screw, etc.). Turn the wheel down with the puncture and completely release the remaining air from the tire.
2. In cold weather, heat the air canister to a temperature of at least +15°C (for example, in a warm car), then shake it well.
3. Screw the cylinder connector onto the tire valve.
4. Hold the canister vertically and inject all the contents of the canister into the tire. One canister is sufficient for one tire with a rim diameter (drop diameter) of 15'.
5. Inflate the tire to the required pressure. To ensure the foam is evenly distributed inside the tire and reliably seals the punctures, it is necessary to drive at an average speed of 70 km/h for 10-15 km.
6. As soon as possible, contact a service center for professional tire repair, and regularly check the air pressure in the tire until then.

Note: Direct measurement in tire pressure monitoring systems (TPMS) is not recommended.