Induction heater for body 1000 W (PDR220)

The dent repair tool is capable of heating the plate without flame from the paint on the invisible side of the plate, while the body is restored to its pre-deformed position due to the expansion of induction heating, which does not harm the paint coating.
This dent repair tool with a maximum power of 1.38 kW effectively eliminates small dents on the surfaces of the body and doors. This significantly saves time in the repair process.
At the end and bottom of the induction heater, there are several holes for heat dissipation, which can effectively disperse heat and extend the machine's lifespan.
The induction heater features adjustment buttons, allowing you to select the desired power up or down with the buttons to more accurately position dents of varying degrees.
The metal housing has a smooth surface for easy cleaning. After turning off the power, it can be wiped with a damp cloth. 

Voltage 220V, 50 Hz
Power cord 1.5 m
Power 1.38 kW / 3.0 kVA / 1000 W
Operating frequency 150 kHz
Dimensions 135 x 250 x 75 mm
Weight 4.0 kg

Warranty 12 months

Notes
1. To avoid damaging the surface of the paint coating, do not heat one indentation for too long.
2. After 3 - 5 heating cycles, use a damp towel to reduce the surface temperature.
3. Do not allow the heating head to touch the painted surface; leave a gap of 3 - 5 mm.
4. During heating, the painted surface becomes soft, and pressing on the surface will increase the dent.