Description
This brake bleeding kit is used for replacing brake and clutch fluid, as well as for removing old fluid and air from the replaced brake system on motorcycles, cars, trucks, and pickups.
Automatic brake fluid refill device: there is a long screw fitting on the 0.75L refill bottle cap, which can work with the master cylinder adapter to snap onto the neck of the car's brake fluid reservoir, without the need for hand support.
Fully open the valve on the long screw, the fluid will flow out, and will stop as soon as the brake fluid level in the reservoir is sufficient to cover the threaded opening, no need to monitor it.
On the 1L used oil bottle, there is a hook that can latch onto the engine hood and hold the bottle above the car's exhaust valve, and the trigger lock is also useful for freeing hands while suctioning.
Additionally, you do not need to press the brake pedal repeatedly when using this tool for bleeding brakes and clutches.
The brake system bleeding tool kit includes 4 master cylinder adapters for most car models: 21-30 mm, 24-32 mm, 28-37 mm, 32-41 mm.
No specialized brake reservoir caps are required.
It sucks fluid from the bleed nipple, allowing either to bleed or completely replace the fluid in the system.
The kit includes a reservoir refill kit and an instruction manual.
Air supply 6 - 8 bar.
Air consumption 180 l/min.
Tank capacity 1 and 0.75 l.
Vacuum 60%.
External connector 1/4".
